WELCOME TO Hongkong NKF Machinery Co.,Limited. English | Spanish

Specifications for spherical plain bearing includes bodily dimensions, effectiveness specs, and special options. Important physical dimensions to consider contain bore diameter, bearing width or length-through-bore, together with outside diameter. spherical plain bearings in many cases are calculated in English units for example inches (in), or metric units for instance millimeters (mm) and also centimeters (cm). Performance specs for include radial download capacity and maximum angular misalignment, the quantity of bearing swing from ones normal or aligned condition. Typically, bearing motion is symmetric around the center. The most angular misalignment is 1 / 2 with the overall side-to-side range. When it comes to special features, many "spherical plain bearings" are self-lubricating, corrosion-resistant, or will include a lubrication port. Bearings that happens to be suited to rotating shafts may well rotate about an axis and accommodate misalignment.

Spherical plain bearing is widely applied in engineering, hydraulic oil cylinder metalforming machine, engineering machinery, automation equipment, automotive shock absorber, hydraulic machinery industry etc. spherical plain bearing profile and classification of spherical plain bearing is spherical sliding bearing, basic is by sliding surface contact with spherical surface of the inner and outer. 

According to its structure and types of different, can bear radial load and axial load, radial, axial or is the effect and combined load. Because of the spherical plain bearings spherical sliding large contact area, dip Angle, also because most of the spherical plain bearing special processing methods, such as surface phosphating, galvanization, chrome or sliding surface and lining mat, spraying, etc. So have bigger load capacity and impact resistance ability, and have corrosion resistance and wear, self-aligning and lubrication good or lubricated non-lubricated dirt, dislocation even also can work normally. Therefore, the nsk bearings are widely used in low speed of swing motion, tilt movement and rotation.

spherical plain bearings have an inner ring with a convex sphered outside surface and an outer ring with a correspondingly sphered but concave inner surface. They are particularly suitable for bearing arrangements where alignment movements between koyo bearings shaft and housing have to be accommodated or where recurrent tilting or oscillating movements must be performed at relatively slow sliding velocities. Spherical plain bearings are produced with different sliding contact surfaces combinations, the sliding surfaces of the inner and outer rings are made of different materials.

33208

49175 / 368

SN507